P9000 - 1-5/8" x 1-5/8" Telestrut Tubing

Elements of Section - P9000
Area of Section	0.387 in2 (2.5 cm2)
	Axis 1-1	Axis 2-2
Moment of Inertia (I)	0.166 in4 (6.9 cm4)	0.166 in4 (6.9 cm4)
Section Modulus (S)	0.205 in3 (3.4 cm3)	0.205 in3 (3.4 cm3)
Radius of Gyration (r)	0.655 in (1.7 cm )	0.655 in (1.7 cm )

Column Loading - P9000 Unbraced Height (in) Allowable Load at Slot Face (lbs) Max Column Load Applied at C.G. K=0.65 (lbs) K=0.80(lbs) K=1.0(lbs) K=1.2(lbs) 24 3,640 8,730 8,570 8,330 8,040 36 3,540 8,360 8,040 7,530 6,950 48 3,400 7,880 7,340 6,530 5,660 60 3,210 7,290 6,530 5,440 4,360 72 2,990 6,640 5,660 4,360 3,160 84 2,730 5,940 4,790 3,340 2,320 96 2,430 5,220 3,940 2,560 1,780 108 2,110 4,520 3,160 2,020 1,400 120 1,820 3,840 2,560 1,640 * 144 1,390 2,690 1,780 * * *KL/r > 200

Beam Loading - P9000
Span(in)	Max Allowable Uniform Load (lbs)	Defl at Uniform load (in)	Uniform Loading at Deflection			Lateral Bracing Reduction Factor
			Span/180 (lbs)	Span/240(lbs)	Span/360(lbs)
24	1,710	0.06	1,710	1,710	1,710	1.00
36	1,140	0.14	1,140	1,140	810	1.00
48	860	0.25	860	680	450	1.00
60	690	0.40	580	440	290	1.00
72	570	0.57	400	300	200	1.00
84	490	0.77	300	220	150	1.00
96	430	1.01	230	170	110	1.00
108	380	1.27	180	130	90	1.00
120	340	1.56	150	110	70	1.00
144	290	2.30	100	80	50	1.00
168	240	3.02	70	60	40	1.00
192	210	3.95	60	40	-	1.00
216	190	5.09	40	-	-	1.00
240	170	6.24	40	-	-	1.00

Notes:

1. Above loads include the weight of the member. This weight must be deducted to arrive at the net allowable load the beam will support.
2. Long span beams should be supported so as to prevent rotation and twist.
3. Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.
4. The lateral bracing factor should be multiplied by the load to determine the load retained based on the distance between lateral braces.

Unistrut Channel Specifications

1-5/8" Series Channel:
Material:

• Unistrut channels are accurately and carefully cold formed to size from low-carbon strip steel.
• All spot-welded combination members, except P1001T, are welded 3" (76 mm) maximum on center.
• Steel: Plain 12 Ga. (2.7 mm), 14 Ga.(1.9 mm) and 16 Ga. (1.5 mm); ASTM A1011 SS GR 33.
• Steel: Pre-Galvanized 12 Ga. (2.7 mm), 14 Ga. (1.9 mm) and 16 Ga. (1.5mm); ASTM A653 GR 33.

Dimensions:

• Imperial dimensions are illustrated in inches. Unless noted, all metric dimensions are shown in millimeters.

Curved Channel:

• Many Unistrut 1-5/8" (41mm) channel sections are available as curved pieces in both single and combination styles.
  Contact your local Unistrut Service Center or Unistrut Corporation for ordering information.

Standard Lengths:

• Standard lengths are 10 feet (3.05m) and 20 feet (6.10m). Tolerances are ±1/8" (3 mm) to ±1/2" (13 mm) to allow for cutting.
  Special lengths are available for a small cutting charge with a tolerance of ±1/8" (3 mm).

Load Data:

• All beam and column load data pertains to carbon steel and stainless steel channels. Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2001 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.

  

1-1/4" Series Channel:

Application:

• A framing system designed for medium loads, the 1-1/4" series is especially suitable for use in the OEM, commercial and display markets. It maintains a lightness in scale and a clean line that makes it aesthetically pleasing as well as functional.

Material:

• Steel: Plain
  14 Gauge (1.9 mm), ASTM A1011 SS GR 33
  19 Gauge (1.0 mm) ASTM A1008

• Steel: Pre-Galvanized
  14 Gauge (1.9 mm), ASTM A653 GR 33

  19 Gauge (1.0 mm) ASTM A653 GR 33

13/16" Series Channel:

Application:

• A unique half-size reduction of the 1-5/8" channel width series, this smaller channel size can be used to carry light loads economically in applications such as instrumentation, retail displays and light-duty laboratory supports. It also provides the flexibility found in all Unistrut^® framing systems.

Standard Lengths:

• P-6000 – 16 Feet (4.88m)
• P-7000 – 10 Feet (3.05m)

Material:

• Steel: Plain
  19 Gauge (1.0 mm) ASTM A1008

• Steel: Pre-Galvanized
  19 Gauge (1.0 mm) ASTM A653 GR 33