The cutting alignment guide ensures correct cutting of branch members when used with fittings to make connections. Refer to the table of page 64 for the appropriate value for "A" for cutting.
Standard Dimensions:
Hole Diameter: 9/16" (14mm)
Hole Spacing (From End): 13/16" (21mm)
Hole Spacing (On Center): 1-7/8" (48mm)
Width: 1-5/8" (41mm)
Thickness: 1/4" (6mm)
Material:
- Unistrut channels are accurately and carefully cold formed to size from low-carbon strip steel.
- Steel: Plain 12 Ga. (2.7 mm), 14 Ga.(1.9 mm) and 16 Ga. (1.5 mm); ASTM A1011 SS GR 33.
- Steel: Pre-Galvanized 12 Ga. (2.7 mm), 14 Ga. (1.9 mm) and 16 Ga. (1.5mm); ASTM A653 GR 33.
Dimensions:
- Imperial dimensions are illustrated in inches. Unless noted, all metric dimensions are shown in millimeters.
Design Bolt Torque:
Design Load:
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2001 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
