Gripple Floor Mounted Vibration Isolators

• OS Isolator/Restraints feature large diameter springs with O.D. not less than 80% of rated deflection height.
• Dimensions are in inches.
• Neoprene pad 1/4” thick under spring regardless of style.
• Adjust Load Transfer while Motion Restraint adjustments are loose.
• For compact support of heavy loads, some OS’s include inner springs. For low profile support of heavy loads, OSE’s have clustered springs.
• Available Finishes Hot Dip Galvanized or Zinc Plated.
• Available in 3 different attachment styles, V, U and R.
• Deflections and Spring Capacities
  • 1” Deflection up to 801 lb capacity
  • 2” Deflection up to 300 lb capacity
  • 3” Deflection up to 1,223 lb capacity

Contact Gripple if larger capacities are required.

• DLK Isolator/Restraints are Job Site Custom Designed.
• Rated Deflections are available in 1”, 2”, 3” and 4”.
• The ratio of the outer spring diameter to its height at rated deflection is not under .8 and extra deflection is not not less than 50%. Springs may be clustered as shown and may include inner spring.
• Operating Height is ±10% accurate. Contact Gripple if closer accuracy is needed.
• The pre-compression rod is furnished with units which have the “R” option; specify rod diameter. This rod will extend about 3” below the Neoprene sleeve.
• Available in 3 different attachment styles U, V, and T. Style U shown.
• Available Finishes Hot Dip Galvanized or Primer Black Lacquer.